Mep Consultants

Mep Consultants

As the MEP (M&E) business worldwide continues to turn to parametric 3d model-based building solutions design and coordination techniques, the question of who does what involving companies and consultants has re-emerged. One of many challenges in the current building services industry issues the effective control of BIM models concerning MEP Consultants and MEP Installers.

BIM has many benefits as well as: greater effort between stakeholders, improved design efficiency, less constructability issues on-site and cost proficiency. However, applying BIM requires properly managing scope description and delivery as well as the information flow involving the MEP (M&E) consultant, the MEP (M&E) contractor, several sub-contractors and shop fabricators. On the other hand, BIM can create scope overlap (and as a result costs and delays for the project) between MEP (M&E) experts, contractors and other downstream participants.

In the regular system, where 2d design data is received, the MEP builder would produce services coordination and clash detection. He/she would overlay the 2d drawings of all the services (HVAC, electric, and plumbing) and execute a detailed coordination exercise - usually by using 3d tools or by using BIM methods. The end result would be a model that is spatially matched that can then be used for installment drawing creation and following Mep Contracting.

The regular approach (2D drawing deliverables) didn't require design experts to think about constructability and spatial coordination. However, the BIM process calls for MEP (M&E) BIM instructors to create clash-free 3d MEP models before making 2d design drawings for installers to use. As the advisor is also passing over their BIM model (which is progressively clash free and matched to some extent) he/she is in effect executing some of the scope ordinarily taken on by companies? However and more notably, the MEP model from the guide is not always matched up in the way that the services would be installed or be economical for a Mep Contracting.

MEP is an acronym used for Hardware, Electrical and Water system systems for building projects. Using the increasing difficulty and performance of each system, MEP routines are not confined to the classic mechanical, electrical and plumbing related system but also include fire safety, gas piping, process piping, pneumatic tubing, data systems etc. This informative article assumes that the design has been done by 'Design Consultants' to a certain stage and then passed to 'Installation Sub-Contractors' that will validate the planning and value engineer the design with the process of spatial coordination and procurement of factors to meet the needs of the design. The coordination of Mechanical, Electrical and Plumbing (MEP) systems among themselves and with additional building devices including new and structural procedures is a critical, difficult and frustrating task, especially in difficult building projects with intense MEP needs. The coordination process of Hardware, Electrical and Water system (MEP) systems entails defining the exact position of each constructing system component throughout the building from the difficulties of the envelope defined by the architectural and structural systems to comply with diverse design and operations criteria staying away from any interferences/clashes amongst creating systems. Let's assume that most firms undertake the task of MEP Coordination, without which the site installation from a 'design only' set of drawings can be too much of a risk, there are two ways by which the subsequent process takes Mep Consultants place.